added baro sensor to 730

[jsg at jsgpc.mrcday.com]

In following up on the VE stability I posted of last week, I've shown
that the baro error can easily make several percent VE error when the
code is left stock and a supercharger is added.

To address this, I elected to add a second MAP sensor and patch the
code. Power and ground are attached identical to the original sensor,
and the signal is attached to GF14 (a/d channel 0).

The patched code can be found at

<ftp://jsgpc.mrcday.com/pub/gmecm/axxc.S_032000>

john gwynne

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org