VE table 1 & 2 relationship, and BLMs past 3600rpm.

[Roger Heflin]

I am just having the computer set it to 128 when the car goes WOT.
You don't want to set it at part throttle, as that is how the comp
makes the engine run right.  But having it forced to 128 at WOT would
make tuning by adjusting fuel pressure easier, as the computer could
not correct some of the changes.   Note though that there is a single
2 byte variable in the computer that tells the comp how big the fuel
injectors, and that will adjust the entire fuel curve up or down.
Also there is the wot fuel table that can easily be adjusted up or
down or just certain rpms up or down.  I have pretty much not been
using the afpr as it is pretty crude compared to adjusting it in the
computer.   
				Roger

On Fri, 24 Mar 2000, Douglas Ratcliffe wrote:

> Do you have it set to 128 all the time so you can adjust the fuel using an adjustable regulator?
> 
> Doug R - Black 93Z A4 3.73 - D.B. F-Body Organizer
> Mods: DragRadials,Hooker 1.75" headers,Flowmaster,AS&M CAI
> Mods: 3.73 gears, SLP Torsen, S&S Stage 1 heads, UD pulleys,
> Mods: Chip,EibachSprings,1LEswaybars, AFPR - 13.11 at 105.5
> *My car: http://daytona.f-body.org/doug
> 
> >>> rah at horizon.hit.net 03/24/00 09:57AM >>>
> My car is now always set to use 128 no matter what at wot.    I have
> noticed that I need to go back and modify things so the integrator is
> also set to 128 as it looks like the integrators are also used in a
> similar manner.  I am going to need to study this further.
> 
> 
> ----------------------------------------------------------------------------
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
> 
> 

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org