E-prom ereaser& burner

[David Cooley]

At 01:57 AM 3/25/00, you wrote:
>"Dr.Acacio" wrote:
> >
> > Good point Shawn !!!!!
> > I am looking to find here in Brazil some 29C256 to avoid waiting for UV
> > erasing the 27c256....
> > Do you know what could be used instead of a 27C512 PLCC Eprom???
> > Does exist any 29C512 Flash in PLCC.???????
> > I have tried the 28F512 but is not pin compatible....
> > To test in my car ( Fiat Marelli ECU) each time I spend a PLLC chip, 
> because
> > they dont have window...
>
>You can get the 29C256 from http://www.jdr.com.  They are US$3.96 each.
>Not sure if they ship internationally, but many places do.
>Yes, 29C512 is available in PLCC.  The PLCC version is 32-pins.
>I have noticed the 27Cxxx PLCC chips have no window.  That's strange, I
>wonder why?
>Do you have some adapter to let you use PLCC in place of a 28-pin DIP,
>or does your Fiat's ECU normally use PLCC?


The 29C512 has a different pinout than the 27C512 (in PLCC and DIP)


===========================================================
David Cooley N5XMT Internet: N5XMT at bellsouth.net
Packet: N5XMT at KQ4LO.#INT.NC.USA.NA T.A.P.R. Member #7068
We are Borg... Prepare to be assimilated!
===========================================================

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org