Injector Problem

[PAULMARKAD at aol.com]

Shannen, regarding your TBI injectors seizing;

There are 2 O-rings that go on the GM TBI injector. Both O-rings must be 
placed on the injector and lightly oiled before inserting into the body. 

DO NOT insert the smaller O-ring into the body, before you insert the 
injector. If you do, the O-ring is squeezed between the bottom of the body 
and the injector. This also will squeeze and distort the injector body 
causing it to bind up.
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org