new subscriber please help ecm problem

[alexpeper]

Could check local libraries, there is one on Long Island with Mitchell
On-Demand CD computer updated every 3 months, but no scan tool.
Alex
----- Original Message -----
From: Jeff M <tystorm at email.msn.com>
To: <gmecm at diy-efi.org>
Sent: Thursday, March 30, 2000 12:30 AM
Subject: Re: new subscriber please help ecm problem


> The CD has a big ol copy of ALLDATA info such as Tech and Service
Bulletins,
> nice.  Good repair info but poor pics (grainy big time).  ECM info mainly
> most informative from that that pertains to a Bulletin, with some basic
info
> for eproms such as Broadcast code deciphering and the intended resolve of
> newer versions, and claimed improvements.
>
> Jeff M
>
>
> > Popular Mechanics  CDs  Autozone, for ecm info?, just basic stuff or
> really
> > worth while?.
> > Never heard of that before
> > Grumpy
> >
> >
> >
> > > Hi, Ed.  You should probably have a good reference handy, especially
> > > wiring diagrams.  I've used Popular Mechanics CD's before, they're
> > > available at Autozone stores.
> > >
> > > There's lots of questions that need answers, but you'll want to get a
> > > picture of the ecm power and gound circuits at the very least.
> > >
> > > Shannen
> > >
> > > Ed Stoll wrote:
> > > >
> > > > I am new to the list. I have looked in before and i am
> > > > having trouble searching for help on a problem. I have
> > > > a 1989 Pontiac Grand Prix 2.8 MPI. The car won't start
> > > > without poring gas in the throttle body.It dies as
> > > > soon as that gas is used up. I have spark but no fuel.
> > > > The fuel pump runs and puts out adequate pressure if I
> > > > energize the pump. The check engine light will not
> > > > illuminate unless I ground one side of it. I have
> > > > checked all grounds and tried a different ecm. I
> > > > belive I have power to the ecm but I'm not sure which
> > > > terminals to check. I purchased this car in this
> > > > condition just to see if I could fix it. The stereo
> > > > had been stolen and under dash wires cut. I have the
> > > > dash out now but can't find the problem. All fuses
> > > > test o.k. I don't know where to go from here. Any
> > > > suggestions? How about a web site where I can learn. I
> > > > understand the basics o.k. and want to learn it all.
> > > > Thanks to any who help.  Ed Stoll
> > > >
> > > > __________________________________________________
> > > > Do You Yahoo!?
> > > > Talk to your friends online with Yahoo! Messenger.
> > > > http://im.yahoo.com
> > >
> >
>
> --------------------------------------------------------------------------
> > --
> > > > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the
> quotes)
> > > > in the body of a message (not the subject) to
> > majordomo at lists.diy-efi.org
> >
>
> --------------------------------------------------------------------------
> > --
> > > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the
quotes)
> > > in the body of a message (not the subject) to
> majordomo at lists.diy-efi.org
> > >
> >
>
> --------------------------------------------------------------------------
> --
> > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> > in the body of a message (not the subject) to
majordomo at lists.diy-efi.org
> >
>
>
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>



----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org