'90 Calpaks and PROMs

[Shannen Durphey]

I've found it very helpful to remove some of the proms and solder a
"regular" socket on the calpack.  I must have swapped chips 75 times
in the bench ecm, and the socket still works ok.  I pulled my socket
from an old network card, but I've seen packs of them at Rat-shack for
under a dollar.
Shannen

TRAX wrote:
> 
> A quick question from a newbie here ...
> 
> Those of you who are burning chips from years where the PROM is soldered to
> the calpak ... is it possible to make some sort of adapter or do you have to
> unsolder the PROM, erase the chip, reburn it, and then resolder it to the
> calpak?
> 
> Tim Siford
> '90 IROC
> 
> ----------------------------------------------------------------------------
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org