'90 Calpaks and PROMs

[Kevin Crain]

Pics of my '165 PROM carrier with a 3M low-profile ZIF socket soldered on:

http://members.fbody.com/kevinc/ecm/

Part# on the ZIF socket is Digi-Key A347-ND price $5.49ea.

I like the hot glue idea, this will be my next modification.

-Kevin

At 05:25 PM 5/1/00 -0400, you wrote:
>Yep, unsoldered the stock eprom, soldered in a socket.   Put some hot glue
>around the pins when you're sure the solder job is ok, prevents solder
>joints or the really thin metal you soldered to from cracking.  I used a
>6-cylinder memcal as a trial, then did a V8 one.  
>
>Yeah, gotta get a ZIF socket one of these days!  I remove the chip before
>erasing, but I doubt UV would affect the ESC filter anyway....

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org