Changing Injector Constant

[DC Smith]

Hi Jeff,
 when you change the injector constant, you are removing fuel from
bigger injectors, so you need to add it back in somewhere else. That
said, I wouldn't worry about a 2 lb difference. It should be fine.
 My TR runs fine with 36 lb injectors and a 28 lb (stock inj) chip.
 The determining factor would be if the block learn hovered around 128
or not.

93 Formula wrote:
> 
> I changed my injectors from the stock 22 to 24# last year and want to change
> the injector constant in my eprom in my 93 Formula to compensate.
> This appears to be 0x867c. Do I have to modify the whole fuel table or just
> change a constant to effect change overall?
> 
> Jeff
> 93 Formula
> 77 Nova
> http://Go.To/LilDemon
> 
> ________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
> 
> ----------------------------------------------------------------------------
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org

-- 
***********************************************************************
Dan Smith      84 Regal   11.841 at 115.09     GSCA# 1459
St.Charles, Missouri 
mailto:morepoweral at tetranet.net               
http://www.tetranet.net/users/morepoweral
***********************************************************************
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org