Reorted O2 volts

[nacelp]

Was just playing with the ecm bench witha 1227749 and basically stoock chip.
Just some flags turned off.

All comments reference Diacom,

With the O2 lead disconnected the O2 reported by diacom, key on, no run,
about 450 and wandered slightly, and flickered to .5.

With the O2 input tied to ground thru a 100K resistor was aout 4 millivolts

The O2 reported voltage was about .01 higher then actual.  But, this ain't
lab grade metering
Grumpy



----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org