Quad 4 code

[Shannen Durphey]

Soo... you're looking for a 4 cyl app for the 749?  You've tried
ANHT?  If you're running with a dizzy, how about the turbo sunbird
calibration?
Shannen

cwagner at info2000.net wrote:
> 
> Has anyone done any work with the code from the 88 Quad 4
> setup using the 749 computer?  I was going to use the ANHT code
> from a 90 Corvette but something in the code changes when the
> injectors fire.  I am putting this on a 4 cyl engine and if I used the
> ANHT code, the injectors would fire once ever other rev of the
> crankshaft.  That is unless someone nows how to change things in
> the ANHT code to fire the injectors once every rev of the crank.  I
> am out of ideas.  By the way, I am using the memcal from a 749
> Quad 4 so I now that is not the problem because I tested it without
> the eprom(limp-home).  The computer is a 730.
> ----------------------------------------------------------------------------
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org