A few lt1 ?'s

[Mike]

The automete i have is one you can calabrate from 500 to 200000 pulses per
mile. so i guess the vss output from the pcm will work fine..

Mike
----- Original Message -----
From: Len sabatine <sabatine at epix.net>
To: <gmecm at diy-efi.org>
Sent: Saturday, May 13, 2000 10:14 AM
Subject: Re: A few lt1 ?'s


> At 12:35 PM 5/13/00 -0400, you wrote:
> >Mike,
> >         The VSS output is not scaled for a speedometer. The Speedometer
> > output
> >on the LT1 PCM is set for 4004 pulses per mile! what does the Speedo
> >want? I rescaled one PCM for 8000 pulses per mile, because the Jag
> >speedo wants that.
> >
> >                 Ken
> >
> > > Mike wrote:
> > >
> > > My lt1 install i have a electronic speedo from autometer, a ? i have
> > > is can i run the wire from the computer to the speedo or do i have to
> > > run one directly from the vss? another ?, the wire that goes to the
> > > p/n switch. does it ground in p/n or in drive gears? and the torque
> > > converter lockup wire, what exactly does it do ground when you hit the
> > > breaks? thanks for any info..
> > >
> > > Mike,
>          Autometer Electric Speedos are calibrated for 16 Pulses Per
Revolution
>   and Autometer's Senders are Hall Effect.   FYI.
>
>    Len
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org