Suppliers

[nacelp]

Isn't actual Firesleeve for continuos use at up to 380dF?.
If not is there any for like 380dF continuos.
Grumpy



> Hi Jeff, thought I'd interject. The sleeve you mentioned is only effective
> when the heat is periodic. If the heat is applied for an extended
> (Subjective) amount of time it will heatsoak and you'll experience the
same
> problem that prompted you to use the stuff in the first place. Just
> something to keep in mind.
>
> Charles Brooks
> Mid-Atlantic Speed Shop
> http://www.massmotorsports.com
>
>
> ----- Original Message -----
> From: Jeff M <tystorm at email.msn.com>
> To: <gmecm at diy-efi.org>
> Sent: Friday, May 19, 2000 4:06 PM
> Subject: Re: Suppliers
>
>
> > They
> > have things like Firesleeve which is a nice thick ceramic woven sleeve,
> with
> > or without the nice silicone rubber outer section, this is good to
enclose
> > fuel line that typical heat up in the engine bay, as well anything else
> you
> > want to keep cool or from melting or heat fatiguing, Silver is my
favorite
> > but they default that yucky orange if you do not tell them silver (yes,
> > Taylor from Summit for one has this type of stuff too).
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org