P&H Injector Interface

[Romans, Mark]

Both the 730 and 165 ecm,  (730 is 90-92 TPI V8 ecm, speed density also some
6 cyl stuff) and ,(165 ecm is 86-89 TPI V8, also some 4cyl s10's) Use one
injector driver, that splits in the ecm to two wires (And two connectors)
that go out and drive the injectors.
Mark

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org