New setup....need some help!

[Squash]

I haven't gone in too deep, but on aujp code, there is a setting for the BLM cell to use at idle
(527h).  It was originally set for cell 4, which is what the original 550rpm idle would have used
according to the cell limits set between 510h and 515h.  Well I bumped my idle up to 800, and I
drive around for hours on end right at idle.  My logic says to set it to the corresponding cell
(IIRC 13), and when I started my tuning it confused the heck out of me.

Squash

>  I think you got my post mixed up with the person who origionally posted.
> I'm not having problems with mine, but saw the responce to his question and
> was curious if there was something that let the ECM know what range of cells
> idle is at.
> Anytime I see something I wasn't aware of even if I'm not working on it
> right then I like to learn about it and file it away for future use.
> 
> Kevin R
> 
> 
> > Have you read the tuning tips on the diy-efi.com/gmecm page?
> >
> > I wouldn't worry about the cell until you need to start tuning the VE
> tables.  It sounds like you
> > haven't changed your idle speed anyways.  What is your idle speed?
> >
> > Squash
> 
> 
> ----------------------------------------------------------------------------
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
> 


=====
Trains, Trucks, and EFI at http://www.trailrunners4x4.org/users/realsquash

__________________________________________________
Do You Yahoo!?
Get Yahoo! Mail - Free email you can access from anywhere!
http://mail.yahoo.com/
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org