GN injector offset

[Roger Heflin]

On Tue, 17 Oct 2000, Scott & Jennifer Peitzsch wrote:

> Would any of you who are familiar with the GN PCM/bin care to tell me
> if it includes an injector offset vs. battery voltage table?  I'm using
> a set of stock GN 30lbers (0 280 150 218) in my LT1 and wouldn't mind
> updating this data in the LT1 PCM if its readily available.

I believe the Lt1 edit people are putting that in (or already have).

I don't know if a 93 LT1 computer has it, it probably does, and it
probably is not too hard for me to find.

Any idea on how you go about testing a new set of injectors for this
sort of parameters?   I have been running some Ford SVO 30's on my 93
for a couple of years and I am noticing some odd idle BLM's (one side
is rich, other is lean) but at higher than idel throttle everything
looks good, and the only thing I can figure out is the injectors are
acting oddly (not opening fast enough or 1-2 injectors slower than the
others).

				Roger

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org