1227727 INJ.DRV.

[Bruce Plecan]

They will work for a while with insane loads, and then start to get erratic
at high rpm, then will just work cold, and then not at all.
I'd venture a quess that they slightly over rate the fuses so they aren't
current limiting the normal operation of the injectors
Bruce

> but the driver itself will handle 20 amps?
>
> Swayze
> mswayze at truswood.com
> kswayze at bellsouth.net
> <8-{b>
> ----- Original Message -----
> From: "Squash" <realsquash at yahoo.com>
> To: <gmecm at diy-efi.org>
> Sent: Thursday, October 19, 2000 4:21 PM
> Subject: Re: 1227727 INJ.DRV.
>
>
> > Maybe it's because there are only 6 injectors vs. 8?
> >
> > Squash
> >
> > --- Swayze <kswayze at bellsouth.net> wrote:
> > > I was looking at 1227727vette.zip jpegs last night and comparing them
to
> the
> > > 91 lumina manuals I have so that I could be sure I wired up a harness
> > > correctly (trying to map it out), and noticed that the injectors on
the
> > > vette 727 have a 20 amp fuse. The v-6 ones I have been looking at show
a
> ten
> > > amp fuse. only thing on the circuits are the injectors and the drivers
> in
> > > the ECM.
> > > question: is there a difference in the drivers on the ECM's between
the
> > > various 727's? if so, whats in the vette '727?
> > >
> > > byE
> > > Mike
> > > Swayze
> > > mswayze at truswood.com
> > > kswayze at bellsouth.net
> > > <8-{b>
> > >
> >
>
> --------------------------------------------------------------------------
> --
> > > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the
quotes)
> > > in the body of a message (not the subject) to
> majordomo at lists.diy-efi.org
> > >
> >
> >
> > __________________________________________________
> > Do You Yahoo!?
> > Yahoo! Messenger - Talk while you surf!  It's FREE.
> > http://im.yahoo.com/
>
> --------------------------------------------------------------------------
> --
> > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> > in the body of a message (not the subject) to
majordomo at lists.diy-efi.org
> >
> >
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org