Quick question

[Dave Zug]

well if you plug a bios chip in a 730, it'll reboot your car  ;-)

okay, enough of that. YES you can, but you should concatonate your binary
file with another copy of itself before burning the 512. this will put the
file in the high and low halves of the chip, where you can be sure the
computer can see it wherever it points (it points to only ONE, the low side
I beleive, but doing both sides covers you.)

There are fancy things you can do with a 512 like wire a jumper thru a
switch to the A14 (i think) leg and actually burn 2 seperate images onto the
512 and switch between them (like a NOS image and a NORMAL one). a few
aftermarket vendors sell up ro 16 images on one chip for smaller chips line
in the Grand National.

more than you wanted to know, as always.


----- Original Message -----
From: NRG <euro at lvcm.com>
To: <gmecm at diy-efi.org>
Sent: Monday, October 23, 2000 8:08 PM
Subject: Quick question


> Hey guys. I got a quick question...   I found a 27C512 EPROM on one of my
> old 486 motheboards... hehe. I was wonder...  could I use this in my 730
ECM
> which requires a 256 ?  Thanx :)
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org