ALDL stream recycle time

[Dave Zug]

Hey John, Can you give me a link to your website? I thought you had a 2-bar
MAP bin over there.. Did you?

Thanks.

----- Original Message -----
From: John S. Gwynne <jsg at jsgpc.mrcday.com>
To: <gmecm at diy-efi.org>
Sent: Tuesday, October 17, 2000 6:46 AM
Subject: Re: ALDL stream recycle time


>
>
> | Rephrased: Does the ALDL stream ('165 and or '730) simply repeat nose to
> | tail or is it's transmission restarted at a set interval of time?
>
> it definitely can be made to repeat nose-to-tail with smaller frames
> and do a faster update rate as you ask.
>
> quick and dirty....
>
> You could replace each entry in the MODE1 address table with that for
> MAP (for example). Then each MODE1 frame would give 63 readings of
> MAP. You probably would need to time stamp each byte as received to
> make sense out of the stream; each sample would not necessarily have a
> fixed sample period.
>
> Similarly, you could divide the 63 data bytes into 3 or 4 sub-frames for a
> faster update rate.
>
> john gwynne
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org