Prom Burner

[Bruce Plecan]

You will need a double row pin header in order to read the EPROM in the
MEMCAL without unsoldering the EPROM (a major PITA). Take a look at the new
FAQ section in the GMECM and it will tell you where to get the header. I
bought mine at a local radio parts supply store (forget Radio Shack). As for
an Eraser, I have finally decided to build my own with a G15T8 ultraviolet
bulb and a standard 18" light fixture from Home Depot. All the Erasers I've
inquired about will not accept the MEMCAL. Check out intronics website on
how
to build an eraser yourself.

With a drop of solder the Dataraser II will work.
Just need to defeat the cover switch, and NOT LOOK INTO IT
Bruce

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org