B Codes

[TK]

I found the same thing on my 3800 SC the knock was
----- Original Message -----
From: Dave Zug <dzug at delanet.com>
To: <gmecm at diy-efi.org>
Sent: Monday, September 04, 2000 8:56 PM
Subject: Re: B Codes


>
> ----- Original Message -----
> From: Peter Gargano <peter at techedge.com.au>
> To: <gmecm at diy-efi.org>
> Sent: Monday, September 04, 2000 3:55 PM
> Subject: Re: B Codes
>
> > OTOH, the FMD determines the cylinder count from the NetRes too,
> > but, as has been pointed out before, the NetRes's cylinder count can
> > be changed with an extra resistor across two pins of the MemCal.
> >
>
> suppose I'll have to look that one up...
>
> > The knocksensor signal conditioning circuit ("ESC circuit") should
> > be specific to a motor and/or the sensor's placement.
> >
>
> Now thats a downer.
>
> so what you are saying is that unless I wanted to turn knock detection
OFF,
> and patch the thing with a resistor that they are good for prom donors
only.
> I may have still made out.
>
> cool - a calpak 'mobile'.. anyone got a coat hanger?
>
> Thanks for the info, you too ludis.
>
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org