Used EPROM burner and eraser

[Bruce Plecan]

If you shop around you can get two sets for less then the $75 figure, and
then you have 12, Generally a tank or two of the Slick 50 with save any
injector, if it's salvageable.  If ones dead you have spares.
Also, would show when ya check the plugs.
AND if this is an intial set up, and if they are wrong, and you need larger,
it's hard to lose money on this deal.  You'll rarely sell used injectors for
what you paid for them.
Bruce



----- Original Message -----
From: "Dan Townsend" <xybertron at cox-internet.com>
To: <gmecm at diy-efi.org>
Sent: Monday, September 18, 2000 7:03 PM
Subject: Re: Used EPROM burner and eraser


> It would be cheaper to buy them new.  It is $120ish to clean and balance 8
> plus probably $75-100 for a used set.  New is only $210.
>
> From: <akallotte at juno.com>
> To: <gmecm at diy-efi.org>
> Sent: Sunday, September 17, 2000 7:56 PM
> Subject: Re: Used EPROM burner and eraser
>
>
> > I didn't want to bother the group, but I need a burner also - not an ISA
> > though because of laptop...
> >
> > ...also looking for 8 or more GN injectors cheap - or SVO 24# or 30# -
> > engine program says I'll need 27#
> >
> > ...also need the name of someone who'll restore and flow and flow match
> > those injectors
> >
> > Sorry for the wanted ad, but sometimes you need a little help.
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org