aldl stuff

[black maj]

>From: "D. Barry Stubbs" <z24man at earthlink.net>
>Reply-To: gmecm at diy-efi.org
>To: gmecm at diy-efi.org
>Subject: Re: aldl stuff
>Date: Sun, 24 Sep 2000 00:53:46 -0400
>
>
> > I will concur that the 2-transistor circuit would draw less current. 
>I've
> > built and sent out a few of them, they seem to work well, but I'm still 
>a
> > bit apprehensive about them for some reason.
> >
> > -Andrew
>
>So far so good with the two trans model on my 7730 and Toshiba laptop.
>What I did for powering purposes was get my juice from the radio
>harness.  I also made a power connector that powers the laptop off that
>same circuit, so I'm not running down the battery nor using the lighter
>socket.  There's just enough voltage to run the laptop, but it won't
>charge the battery, since the laptop expects about 15VDC from the A/C
>adapter.
>

Lucky you... mine runs off 18volts.. and won't boot off 14.4V :(  so had to 
buy a 'spent' battery and put a regulator in it because the battery is 10 
cells/12volts ish, would have prefered to get 18 votls DC from cat battery.. 
but too much curcuit for my liking to handle around 1.7 AMPS output....


Ben



>========================================================================
>D. Barry Stubbs                                    http://surf.to/z24man
>(478) 745-9429                                     AOL IM: thez24man
>z24man at earthlink.net          BNet Member #828     ICQ #5409648
>#101STS MidGa Region SoloII   94 Q4 5spd Aqua Z26  88 2.8 5Spd White Z24
>----------------------------------------------------------------------------
>To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
>in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>

_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.

Share information about yourself, create your own public profile at 
http://profiles.msn.com.

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org