Test Benches

[Bruce]

Kids stuff, try 16.
Or 8 peak+holds (TBI)
dems make noise, and get ecms hot.
BTW, at over 120dF case temp you might have injectors go erratic
Bruce

From: <bcroe at juno.com>
Subject: Re: Test Benches
> I built a test bench for those 76-79 Cadillac analog
> ECUs 4 years ago.  It used reed switches in the 
> distributor to pick up bank timing, so I hooked a
> couple of reed relays to a pulse generator to give
> the engine output signal.  I made the mistake of 
> mounting 8 injectors on the wood panel; what a
> racket they make.  Bruce Roe
> 
> On Sat, 8 Sep 2001 08:24:02 -0500 (CDT) "Gregory A. Parmer"
> <gparmer at acesag.auburn.edu> writes:
> > 
> > > Hmm, was yours running first?
> > > I'd bet thou, I got a few more hours on mine <g>..
> > 
> > Not really sure about who was first, but yours did make
> > mine look silly. Most of my doings have been "proof of
> > concept".
> > 
> > The ViSSim idea just might cover the whole project, assuming
> > it'll create the dizzy pulse. I'd been ignoring that one
> > while in DIY mode, but a bought solution that'd cover it all
> > is indeed attractive.
> > 
> > -greg


----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org