DIY-WB Parts Kit orders

[rr]

The kits are the components to stuff the PCB. No sensor, no pcb, no
anything else.

The design itself can be found on the diy-efi web site under members
projects.

Bruce Roe has designed a 40 LED bar graph display. I'm still working
on doing a schematic capture of it. Once done that will also be released.
The output from the DIY-WB PCB unit can be data logged or tied
to  DVM.

BobR.


Doug Dayson wrote:

> Sorry all, I've been "out of it" (my normal mode of ops).
>
> What all is in the kit, components and PCB and schematic etc, as in everything
> except the enclosure and WB O2 Sensor?
>
> What was the final output display (if any)?
>
> Thanks, and thanks to all for your hard work!
>
> Doug
>
> Bob Valentine wrote:
>
> > A big *THANKS* to Steve from here at the DIY-WB Board Distribution center.
> >
> > I'll make the offer again to set one up a page to take requests for
> > assembled boards, for someone who wants to handle it.    Just contact me
> > off-list.
> >
> > -> Bob Valentine
> > -> bob at tecmark.com
> >
> > At 08:38 AM 8/22/2001 -0600, you wrote:
> > >Thanks to Bob Valentine, there is a web page for requesting parts kits.
> > >Please see:
> > >
> > >http://208.37.117.207/kits.html
> > >
> > >This will not include the sensor.  Let's leave the 'group buy' open for
> > >two weeks, and I'll be able to give a final price then.  Because of
> > >quanity discounts, and I will be supplying parts I already own, the price
> > >should be less than Steve Ravet's $25 digikey estimate (thanks for
> > >looking up the part numbers Steve!).  I'll post a list of names just
> > >before the group buy closes, so people can confirm they are on the list.
> > >There will also be some extra kits made up, but please don't count on it.
> > >Please sign up on the web.  Payment won't be necessary until just before
> > >your kit ships.
> > >
> > >- Steven Ciciora
> > >
> > >On Wed, 22 Aug 2001, steve ravet wrote:
> > >
> > >> The parts list w/digikey numbers for the DIY-WB project is on the WWW
> > >> page now.  FYI everything but the O2 sensor comes to about $25,
> > >> everything including sensor, enclosure, etc. is about $210
> > >>
> > >> --steve
> > >>
> > >> --
> > >> Steve Ravet
> > >> steve.ravet at arm.com
> > >> ARM,Inc.
> > >> www.arm.com
> > >>
> > ----------------------------------------------------------------------------

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org