DRAC in '95S10

[Programmer]

Found a better description in the code 24 troubleshooting, and found my bad
ground <g>... Works good--and the DRAC calibration info was correct--thanks
Shannen and Scott !!

Lyndon.
----- Original Message -----
From: <WEG1192 at aol.com>
To: <gmecm at diy-efi.org>
Sent: Thursday, August 30, 2001 6:13 PM
Subject: Re: DRAC in '95S10


> In a message dated 8/30/2001 5:00:29 PM Eastern Daylight Time,
> nwester at eidnet.org writes:
>
> > I know someone on the list has been here before--I've retrofitted the
> >  16197427 in place of the FLASH VCM on
> >  this '95S10 Vortec, and have some speedo grief. Is the VSS translated
in
> the
> >  speedo head in the '95 ??
> >  DRAC is wired in, but I've got a feeling that this thing wants an AC
signal
> >  from what Alldata info says.
> >  Lyndon.
>
>
> No, I am running the two pulse per mile optical (square wave, whatever)
> directly into the 7427. It is just like the 7747. JW
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org