Accel injectors

[ae2598 at wayne.edu]

I, too, have heard that a 350 can get away with 19#'ers at a
higher-than-stock pressure.  It has been said that, all things equal,
you'll run better that way because of better fuel atomization.

Anyone care to confirm/deny this?  Any of you guys running a 350 with 19#
injectors?

On Sat, 6 Jan 2001, Dan Townsend wrote:

> Stock 305 is 19#
> Stock 350 is 22#
> 
> Several individuals including myself use 24# SVO's with no problems.
> 
> Dan
> 
> ----- Original Message -----
> From: "Diane Stowe" <DianeS at speakeasy.org>
> To: <gmecm at diy-efi.org>
> Sent: Saturday, January 06, 2001 11:50 AM
> Subject: Re: Accel injectors
> 
> 
> > I have a similar question on Accel injectors. Summit has sets for very
> > attractive prices. I need a set of 8 for my stock 350, most places have
> sets
> > for $445 +. Summit has sets for $280+ ? They are bosch injectors I think.
> >
> > If you all don't mind a beginner question or two ?
> >
> > for a stock 350 what #lb rating should my injectors have ? different
> vendors
> > tell me different things.
> >
> > the set I received with my used tpi setup, are I'm told a 305 set, which
> > would run too lean for a 350. However I have also been told that the 305
> > injectors would work fine in a 350 up to something like 350-375 HP.
> >
> > some of my used injectors are missing the clips, the pintle caps on some
> are
> > broken or missing.  one such injector has the pintle ? retracted or pushed
> > back in.
> >
> > so at 15-20+ dollars apiece to get them rebuilt, it would seem that the
> > summit set would be a better idea. However they have several different #lb
> > sizes for a 350 tpi, and I don't know which set I would use.
> >
> > if anyone could help that would be great, I'd appreciate it.
> >
> > thanks, and a happy new year to everyone
> >
> > Diane
> > ----- Original Message -----
> > From: <akallotte at juno.com>
> > To: <gmecm at diy-efi.org>
> > Sent: Saturday, January 06, 2001 5:22 AM
> > Subject: Accel injectors
> >
> >
> > > Has anyone used the Accel injectors?  Accel says they are rated at 3
> bar,
> > > 14.4 ohm, and are pintle type.  They say they are stock length
> > > replacements for TPI.  Are they the same as SVOs?  Or are they actually
> > > closer to the stock TPI injector?
> > > ________________________________________________________________
> > > GET INTERNET ACCESS FROM JUNO!
> > > Juno offers FREE or PREMIUM Internet access for less!
> > > Join Juno today!  For your FREE software, visit:
> > > http://dl.www.juno.com/get/tagj.
> >
> > --------------------------------------------------------------------------
> > --
> > > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> > > in the body of a message (not the subject) to
> majordomo at lists.diy-efi.org
> > >
> > >
> >
> > --------------------------------------------------------------------------
> --
> > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> > in the body of a message (not the subject) to majordomo at lists.diy-efi.org
> >
> >
> 
> ----------------------------------------------------------------------------
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
> 
> 


----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org