Questions from a newbie

[rr]

Drew,

You mentioned trying to lean the VE table down, maybe a typo, but high BLMs
would be adding fuel. A 40-45 Kpa idle sounds good, about 16" vac. With a
224 @ .050 & .465" lift, 108 LDA, runs about 50-55 Kpa in a 327.

BobR.

Drew Skinner wrote:

> Hi guys and gals gotta couple questions...
>
> First, is there an archive of postings around anywhere? I remember being able to search thru the DIY-EFI archies at one time, but I can't find a link to any since everything moved.
>
> And second, what kind of idle MAP reading is typical? More specifically, is a 40-45KPa vac signal @ ~750rpm normal for an L98 with a mild cam (218/228-.492"/.492")? I'm trying to lean the low rpm VE table down and I'm still chasing some high BLMs. I haven't been able to find any vacuum leaks, so I thought I'd ask what everyone else sees at idle.
>
> Thanx!
> Drew
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org