Questions from a newbie

[Dave Zug]

My L98 383 TPI W/ ZZ3 cam (bout 208/215 510/510 Lft) idles at 46 Kpa at 650
rpm.. so I second that. "OK"

Are you the owner of "Snake Skinner" ?

----- Original Message -----
From: Drew Skinner <drew.skinner at lcra.org>
To: <gmecm at diy-efi.org>
Sent: Tuesday, January 16, 2001 1:41 PM
Subject: Re: Questions from a newbie


> Cool, thanks Mike. I just needed a point of reference.
>
> Drew
>
> >>> davis at mail.eecis.udel.edu 01/16 2:50 PM >>>
> In message <sa645da8.044 at lcuuser.lcra.org>,Drew Skinner writes:
> >
> >And second, what kind of idle MAP reading is typical? More specifically,
is a
> >40-45KPa vac signal @ ~750rpm normal for an L98 with a mild cam
(218/228-.492"
> >/.492")? I'm trying to lean the low rpm VE table down and I'm still
chasing so
> >me high BLMs. I haven't been able to find any vacuum leaks, so I thought
I'd a
> >sk what everyone else sees at idle.
> >
>
> Seems reasonable..  My L98 with LT4 HOT (218/228-.525/.525) cam idles at
> 600rpm/62KPa
>
> mike
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org