Delco 808 ECU

[Daniel Collins]

Allan if running of the cam you will need a encoder wheel with 36 slots and
6 slots as it is half crank speed.


-----Original Message-----
From: Allan Langford <allanlangford at yahoo.com>
To: gmecm at diy-efi.org <gmecm at diy-efi.org>
Date: Sunday, January 28, 2001 5:18 AM
Subject: Re: Delco 808 ECU


>Hiyas,
>
>Nah its a dfi setup from factory with cam angle (reluctor type)... from
what
>i have read i need an 18 impulse and 3 impulse input per CRANK rev for the
>coil pack from a v6 or 36 / 6 impulses if i run it from the cam?
>
>also the resistance of my injectors is about 3.8 ohms.. too low for the 808
>to drive?
>
>Regards,
>    Allan Langford
>


----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org