Odp: anyone try this

[Marek]

----- Original Message -----
From: Gary Heuston <gary.heuston at afwa.af.mil>
To: <gmecm at diy-efi.org>
Sent: Monday, July 09, 2001 5:13 PM
Subject: Re: anyone try this


> I inquired to Circuit Cellar about having that article posted on their
website
> so that it could be viewed and their official response was "go to hell".
> actually it was more like "you can't put our copyrighted material on your
sight
> (I never asked to do so) but we will put it on our site and you can link
to it
> for $250.
>
> so does anyone have a copy of the magazine they would be willing to scan
for
> less than $250?

I'm also interested in obtain the copy of it
cheers
Marek
>
> Gary
> gary.heuston at afwa.af.mil
>
>
> "Cosby, Melvin C. (GEL, MSX)" wrote:
>
> >         Hi everyone, this is my first post.  I really enjoy reading this
> > list.
> > The October 2000 issue of Circuit Cellar describes this OBD II protocol
> > converter.  It is from ISO to RS232.  The magazine article talks mostly
> > about the ISO protocol.  The hardware design is in the magazine and the
> > microcontroller and PC software can be downloaded from the web site you
> > mentioned.  Look at the bottom of the page for a link titled "Circuit
Cellar
> > Readers...".  It is ISO 9141-2 only.
> >         Since the article was published the Ford and GM protocols have
> > appeared as options on the web site.  If you built the converter from
the
> > article I don't know if he would sell just software for the other
protocols.
> > It wouldn't hurt to ask.
> >
> > Later,
> > Mel
> >
> > PS The Circuit Cellar article is what got me searching on the web for
EFI
> > material.  That is how I came to subscribe to this list.
> >
> > -----Original Message-----
> > From: toddburkard at pcmc.com [mailto:toddburkard at pcmc.com]
> > Sent: Friday, July 06, 2001 4:44 PM
> > To: gmecm at diy-efi.org
> > Subject: anyone try this
> >
> > Has anyone tried this Scan tool for the OBD II?
> >
> > http://www.ghg.net/dharrison/obdscan.html
> >
> > Or has anyone built a cable and found some software that works with it
for
> > the OBD II GM's?
> >
> > Thanks,
> > Todd
> >



-- 

Jezdzisz konno?
Ten konkurs jest dla Ciebie! [ http://konkursy.onet.pl/emarket2/ ]

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org