'749 questions

[Bruce]

The 89 Turbo Trans Am used it for the boost display on the dash.
Using it would allow for better resolution in the calibration (would allow ~
28 PSI of boost vs resoltion ending at ~14).
Bruce



From: <sapearso at rockwellcollins.com>
Subject: Re: '749 questions
> I've seen the 3-bar MAP sensor mentioned from time to time, what came
stock
> with this? Is the
> advantage just being able to run more boost? or am I missing something...
> Scott

> From: rr <RRauscher at nni.com>
> Subject: Re: '749 questions
> I think it started with a boosted '749 Fiero then morphed into 808
> and map stuff. I think the 808 was mentioned since there is boosted
> code available for it? Anyway, the '749 MAP & boosted '808 MAP
> would require the same equations & routines.
> This would also be true if someone were to add the required code for
> 2 or 3 bar to a '730 (hint-hint).
 BobR.

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org