84 Vette BINS

[Louis Baiani]

Well the ECM is available anyway.... hopefully I don't toast anything! :O)

Bruce wrote:

> Nodda,
> none,
> not from GM, junk yards, friends, or remanufactured thru the local parts
> houses.
> If your serious about working with a particular ecm, I'd strongly suggest
> that you or anyone working on one ecm long term have 3 on hand.
> there are times when -hit happens, and it pays to have spares.  Seems like
> to me as long as I have a few of any number that I'm working on things are
> fine, but I've also, been to a point when I needed an ecm, and none were
> around.  Not a good thing
> Bruce
>
> From: "Louis Baiani" <nepti at nbnet.nb.ca>
> Subject: Re: 84 Vette BINS
> > You couldn't find the ECM?  Like in the junk or remanufactured/new?  I
> have
> > chips for them, they were hard to find, and kinda expensive, i'll give you
> that
> > one (especiall since i'm in Canada).  I cross referenced something that
> would
> > work exactly the same, and got some obsolete parts.  I used Cypress 282's
> > (EPROM) - replacing the old BPROM, and at that time are decently fast
> (45ns).
> > Louis
>
> > Bruce wrote:
> > > None that I know of.
> > > Off hand, I don't recall anyone ever offering chips for them.
> > > At one time (years ago) using every contact I had I couldn't even find a
> > > Xfire ecm.
> > > Bruce
> > >
> > > From: "Louis Baiani" <nepti at nbnet.nb.ca>
> > > Subject: Re: 84 Vette BINS
> > > > What's the address again Shannen?  Or what's Steve's address?  Is
> there no
> > > PROM's
> > > > for 84's, even performance ones?
> > > > Louis
> > >
> > > > Shannen Durphey wrote:
> > > > > Send them to Steve Ravet or upload them to /incoming and send a note
> to
> > > the
> > > > > list.
> > > > > Shannen
> > > > > Louis Baiani wrote:
> > > > > > I have two bins for this vehicle..one is the original and the
> other is
> > > > > > the updated one - so where do I put them on the site?
> > > > > > Louis
>
> ----------------------------------------------------------------------------
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org