Another Casualty

Bruce nacelp at bright.net
Fri Jul 20 11:57:06 GMT 2001


I think it's more that you just reached the end of it's service life.
Nothing lasts for ever.  Vibration and heat will kill eventually kill the
best of electronics.   FWIW, some of them I've run at continued WOT under as
high as load as I can, and 110dF is a *normal* operating temp..
Bruce




----- Original Message -----
From: "Gonyou, Jeremy (.)" <jgonyou at ford.com>
To: <gmecm at diy-efi.org>
Sent: Friday, July 20, 2001 7:28 AM
Subject: RE: Another Casualty


>
> Yeah, it was about 90 yesterday.  My ECM is not underhood, but is
underdash.
> After work I got in my car and everything fired up fine, but wouldn't run
on my socketed memcal.  I tried about a dozen combinations of known good
chips and memcals - nothing was conclusive.  I replaced the ECM *and* memcal
and everything is fine now...I'm just not %100 sure what happened.
> I'll go with the overheating thing for now...
>
> Thanks for the help, guys (and the sandwich jokes).
>
> Jeremy
>
> Bit of incriminating evidence:  I usually leave the memcal cover off for
quick prom changes.  This probably didn't help.  Yesterday I put velcro on
the cover so I don't have to operate a nut driver to take it off.  Maybe a
fan would be a good diy project?
>
> -----Original Message-----
> From: Programmer [mailto:nwester at eidnet.org]
> Sent: Thursday, July 19, 2001 5:21 PM
> To: gmecm at diy-efi.org
> Subject: Re: Another Casualty
>
>
> Really hot day there ?? This may sound funny--but pull your ECM and stick
it
> in the fridge for an hour...and re-install it. If it fires up
fine...butter
> it, it's toast. Did you sandwich cost $7.30 ??
>
> Lyndon.
> ----- Original Message -----
> From: Gonyou, Jeremy (.) <jgonyou at ford.com>
> To: <gmecm at diy-efi.org>
> Sent: Thursday, July 19, 2001 11:17 AM
> Subject: Another Casualty
>
>
> >
> > So I go out to Wendy's to get a sandwich and when I get back my Sunbird
> has a high idle, constant SES, and no ALDL comms.  I replaced my hacked up
> memcal with a bone-stock unit, but the same stuff...limp home.
> >
> > Is it just me...or did my ECM go out to lunch the exact same time that I
> did?
> > Is this how the '7730s go, just all the sudden?
> >
> > Jeremy (limping home)
>
> --------------------------------------------------------------------------
> --
> > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> > in the body of a message (not the subject) to
majordomo at lists.diy-efi.org
> >
> >
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org




More information about the Gmecm mailing list