BatV

[rr]

Have a good question: what is the minimum acceptable
battery voltage during crank? I put a DVM across the
battery terminals, pulled the fuel pump fuse and cranked
for ~10 seconds. Battery drops to ~10.7 volts and holds
during the cranking.

For a charged battery & good starter is this a bit low?

EFI content: The ECM will still fire the injectors and
the engine starts with this low of a battery voltage.
The ECM reports the BatV term to be at 9.0 volts during
crank. Lots of loss with the battery in the trunk!

Thanks,

BobR.
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org