BatV

[Bruce]

Me, Doc, and Sleepy all draw the line at 9.0V
What ga. wiring ya using?.
Bruce

From: "rr" <rrauscher at nni.com>
Subject: BatV 
> Have a good question: what is the minimum acceptable
> battery voltage during crank? I put a DVM across the
> battery terminals, pulled the fuel pump fuse and cranked
> for ~10 seconds. Battery drops to ~10.7 volts and holds
> during the cranking.
> For a charged battery & good starter is this a bit low?
> EFI content: The ECM will still fire the injectors and
> the engine starts with this low of a battery voltage.
> The ECM reports the BatV term to be at 9.0 volts during
> crank. Lots of loss with the battery in the trunk!
> BobR.

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org