Honda WB Sensor question

[rr]

 2.98K and the code: 9X08.

BobR.

P.S.  Heater resistance has no bearing on cal resistor.


Richard Wakeling wrote:

> Hi John and all,
>
>     A thought crossed my mind about these four digits stamped across one of the
> hex flats near the threaded section of the WB sensor. Could these four digits
> correspond in some way with the calibration resistor in the plug or the heater
> resistance.
>
> I have two and they measure up as follows.
>
> Hex marked 0113,  Cal resistor   4.31 K ohm, Heater resistance 3.1 ohm.
> Hex marked 0717,  Cal resistor 11.83 K ohm, Heater resistance 3.2 ohm.
>
> Could I ask all of you who have the same type of WB sensor to post the same data
> and see if it there is any intelligence to these digits.
>
> TIA
> Cheers Richard
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org