Honda WB Sensor question

[Bob Valentine]

I guess that ends that discussion, two 0706's with a ~14k diff in resistance.

How about the numbers on the shell near the top, just above the "NTK"? 

Mine's L1H1.  It too is a Napa OS791.   Mabye the # on the flats is a date
code.

-> Bob Valentine
-> bob at tecmark.com

At 09:14 AM 7/25/2001 -0500, you wrote:
>Mine is a NAPA OS791, measures 32.6K and is 0706.
>
>Scott
>
>----- Original Message -----
>From: "Bob Valentine" <bob at tecmark.com>
>To: <gmecm at diy-efi.org>
>Sent: Wednesday, July 25, 2001 2:05 AM
>Subject: Re: Honda WB Sensor question
>
>
>> Mine is 0706, cal resistor is 18.02 K ohm
>>
>> -> Bob
>>
>> At 10:32 AM 7/25/2001 +1000, you wrote:
>> >I have two and they measure up as follows.
>> >
>> >Hex marked 0113,  Cal resistor   4.31 K ohm, Heater resistance 3.1 ohm.
>> >Hex marked 0717,  Cal resistor 11.83 K ohm, Heater resistance 3.2 ohm.
>> >
>> >Could I ask all of you who have the same type of WB sensor to post the
>> same data
>> >and see if it there is any intelligence to these digits.
>> >
>> >TIA
>> >Cheers Richard
>> >
>> >
>>
>> --------------------------------------------------------------------------
>--
>> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
>> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>>
>
>----------------------------------------------------------------------------
>To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
>in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org