Daicom craps out again.....

[romans, mark]

http://www.ttspowersystems.com/freedload.htm

Check these out, might help with the diacom problem
Mark

----- Original Message -----
From: "Marteney, Steven J." <smarteney at xlvision.com>
To: <gmecm at diy-efi.org>
Sent: Monday, June 18, 2001 7:02 AM
Subject: RE: Daicom craps out again.....


> Peace.  Just wondered if a new version may be lurking.  BTW got your
> response before I got my original post.  Ahh, Internet!
>
> -----Original Message-----
> From: Squash [mailto:realsquash at yahoo.com]
> Sent: Monday, June 18, 2001 9:48 AM
> To: gmecm at diy-efi.org
> Subject: RE: Daicom craps out again.....
>
>
> My bad, parallel is what I meant to say.
>
> Squash
>
> --- "Marteney, Steven J." <smarteney at xlvision.com> wrote:
> > But the Diacom I'm familiar with uses the parallel port, not the serial
> > port.  Older version???
> > Steve
> >
> > -----Original Message-----
> > From: Squash [mailto:realsquash at yahoo.com]
> > Sent: Saturday, June 16, 2001 11:52 PM
> > To: gmecm at diy-efi.org
> > Subject: Re: Daicom craps out again.....
> >
> >
> > Hate to say it, but it sounds like your PC doesn't like diacom.  IBM
> > thinkpads are notorious for
> > having crummy serial ports (and everything else I might add).
> >
> > Squash
> >
> > --- Craig Marcho <cmarcho at swbell.net> wrote:
> > > I went to look at a 90 corvette to replace my lightning struck '85
> > > today.. Has the 727 ecm in it. Diacom would not hook up. No matter
what
> > > I tried. It always worked fine on my '85, and works on some '86's and
> > > 87's. I have always had trouble hooking up to '88 and '89 vettes,
> > > actually, I've never been able to get it to work on them. Now, I try
> > > this '90 and it doesn't work. I do have a registered copy of Diacom,
so
> > > I guess I need to call Rinda and see what they say.
> > >
> > > Is there any other scan program with similar capability of Diacom that
I
> > > can use on the 727?
> > >
> > > Craig M.
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org