ECM solder job

[Louis Baiani]

Thanks Keith,

GC has some "print kote solvent" just for that.  Thanks for all the info.

Louis

"Keith D. Miller" wrote:

> > -----Original Message-----
> > From: owner-gmecm at diy-efi.org
> > [mailto:owner-gmecm at diy-efi.org]On Behalf
> > Of Louis Baiani
> > Sent: Sunday, June 17, 2001 6:38 PM
> > To: gmecm at diy-efi.org
> > Subject: ECM solder job
> >
> >
> > I have an 84 ECM here that has intermittent problems that
> > come and go when it tap on it.  The boards are coated with
> > some rubber sealer..what is recommended to strip that
> > stuff from the board?
> >
>
> It's called a conformal coating. Heat or a solvent is
> usually the safer, easier DIY methods.
>
> You can find some tips on identification and removal here:
> http://www.circuittechctr.com/guides/2-3-1.htm
> http://www.dppr.ctc.com/clndegre/fconcoat.htm
>
> Keith
> --
>
> ----------------------------------------------------------------------------
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org