Code 32 on 165

[Marteney, Steven J.]

Yeah it's the EGR code, Fbody bin, APYU3516 (slightly modified, but the last
modification was a few months ago).  Does setting a code 32 cause a
limp-home mode enable or just merely an advisement?

Steve

-----Original Message-----
From: Shannen Durphey [mailto:shannen at grolen.com]
Sent: Thursday, June 21, 2001 12:21 AM
To: gmecm at diy-efi.org
Subject: Re: Code 32 on 165


EGR code?  Which .bin?  F or Y car?

Truth be told, if you pulled into most shops, you'd probably get a new
version
of each of the below mentioned parts and the problem would go away for
another 2
years.  You should check to ensure that he egr valve isn't hanging up or
sticking due to a piece of carbon wedged in the pintle.

If it bothers you, maybe just shut it off.  That's what GM likes to do.
Shannen

Marteney, Steven J. wrote:
> 
> Anyone have any insight into Code 32's on a 165?  I started setting Code
32
> again last week, coincidentally after going to a 195deg stat from a 180
> hi-flo.  It mainly sets in the morning after about 10 minutes of 75-80
> highway speeds.  It set one time in the evening after work same
conditions.
> The EGR valve and temp diag switch are new within 2 years (and vacuum
> lines).  The vac solenoid is new within a year.  That's what solved this
> problem before.  Any connection bewteen the higher engine temps and this
> thing suddenly setting code 32?  BTW, it didn't set it this morning.
First
> time I drove it on the highway in 5 days.
> 
> Steve
>
----------------------------------------------------------------------------
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org