Delphi connectors

[Bruce]

12146448 is for .80-1.0 mm2 cable
12146447 is for .35-.5   mm2 cable
I'm about out of numbers <g>
Bruce
  Not really.......



----- Original Message -----
From: "Programmer" <nwester at eidnet.org>
To: <gmecm at diy-efi.org>
Sent: Wednesday, June 27, 2001 11:08 AM
Subject: Re: Delphi connectors


> Would you happen to have the pin numbers ? For some reason my GM dealer
> says the pin numbers don't exist--and that's the archive numbers <G>...
>
> Lyndon.
> ----- Original Message -----
> From: Bruce <nacelp at bright.net>
> To: <gmecm at diy-efi.org>
> Sent: Tuesday, June 26, 2001 5:20 PM
> Subject: Re: Delphi connectors
>
>
> >
> >
> > Try a 12110113 for the dark red, and 12110115 for the dark blue.
> > We'll leave out check the archives.....<g>..
> > Bruce
> >    GN is running N I feel froggy..
> >
> >
> > From: "Programmer" <nwester at eidnet.org>
> > Subject: Re: Delphi connectors
> > > Red and blue--both 32 pin.
> > > Lyndon.
> >
> > > From: Bruce nacelp at bright.net
> > > Subject: Re: Delphi connectors
> > > > What color are the receptacles, and how many pins?.
> > > > Are they the same as a 8625?
> > > > Bruce
> >
> > > > From: "Programmer" nwester at eidnet.org
> > > > Subject: Delphi connectors
> > > > > I've tried 13 times now to down load this Delphi*pdf catalogue
that
> > > > > usually hickups right around 13megs and gets unreadable. Anyone
> > > > > got the ECM connector numbers for a 16197427 so I can get my
> > > > > S10 project finished ??
> > > > > Lyndon.
> >
>
> --------------------------------------------------------------------------
> --
> > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> > in the body of a message (not the subject) to
majordomo at lists.diy-efi.org
> >
> >
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org