Was Delphi--now Crossfired

[Programmer]

Is that a reluctant "yes" or a nervous "not sure" ??

Lyndon  : )
----- Original Message -----
From: Bruce <nacelp at bright.net>
To: <gmecm at diy-efi.org>
Sent: Thursday, June 28, 2001 3:14 PM
Subject: Re: Was Delphi--now Crossfired


>
>
> Coulddddd beeeeee.
> Bruce
>
>
>
> ----- Original Message -----
> From: "Programmer" <nwester at eidnet.org>
> To: <gmecm at diy-efi.org>
> Sent: Thursday, June 28, 2001 1:11 PM
> Subject: Re: Was Delphi--now Crossfired
>
>
> > I just don't see the pin in the instrument cluster that needs the input.
> > There's a tach input, and serial data input--is that the one used ?
> >
> > Lyndon
> >
> > ----- Original Message -----
> > From: Shannen Durphey <shannen at grolen.com>
> > To: <gmecm at diy-efi.org>
> > Sent: Wednesday, June 27, 2001 5:45 PM
> > Subject: Re: Was Delphi--now Crossfired
> >
> >
> > > Need to output injector pulse width to instrument cluster?
> > > Shannen
> > >
> > > Programmer wrote:
> > > >
> > > > You wouldn't be out of numbers...thanks again, Bruce !!
> > > > Is there anything in the archives about the '84 vette "instant
> > > > fuel averaging" when you change to the '7747 computer ?
> > > >
> > > > Lyndon.
> > > >
> > > > ----- Original Message -----
> > > > From: Bruce <nacelp at bright.net>
> > > > To: <gmecm at diy-efi.org>
> > > > Sent: Wednesday, June 27, 2001 3:58 PM
> > > > Subject: Re: Delphi connectors
> > > >
> > > > >
> > > > > 12146448 is for .80-1.0 mm2 cable
> > > > > 12146447 is for .35-.5   mm2 cable
> > > > > I'm about out of numbers <g>
> > > > > Bruce
> > > > >   Not really.......
> > > > >
> > > > >
> > > > >
> > > > > ----- Original Message -----
> > > > > From: "Programmer" <nwester at eidnet.org>
> > > > > To: <gmecm at diy-efi.org>
> > > > > Sent: Wednesday, June 27, 2001 11:08 AM
> > > > > Subject: Re: Delphi connectors
> > > > >
> > > > >
> > > > > > Would you happen to have the pin numbers ? For some reason my GM
> > dealer
> > > > > > says the pin numbers don't exist--and that's the archive numbers
> > <G>...
> > > > > >
> > > > > > Lyndon.
> > > > > > ----- Original Message -----
> > > > > > From: Bruce <nacelp at bright.net>
> > > > > > To: <gmecm at diy-efi.org>
> > > > > > Sent: Tuesday, June 26, 2001 5:20 PM
> > > > > > Subject: Re: Delphi connectors
> > > > > >
> > > > > >
> > > > > > >
> > > > > > >
> > > > > > > Try a 12110113 for the dark red, and 12110115 for the dark
blue.
> > > > > > > We'll leave out check the archives.....<g>..
> > > > > > > Bruce
> > > > > > >    GN is running N I feel froggy..
> > > > > > >
> > > > > > >
> > > > > > > From: "Programmer" <nwester at eidnet.org>
> > > > > > > Subject: Re: Delphi connectors
> > > > > > > > Red and blue--both 32 pin.
> > > > > > > > Lyndon.
> > > > > > >
> > > > > > > > From: Bruce nacelp at bright.net
> > > > > > > > Subject: Re: Delphi connectors
> > > > > > > > > What color are the receptacles, and how many pins?.
> > > > > > > > > Are they the same as a 8625?
> > > > > > > > > Bruce
> > > > > > >
> > > > > > > > > From: "Programmer" nwester at eidnet.org
> > > > > > > > > Subject: Delphi connectors
> > > > > > > > > > I've tried 13 times now to down load this Delphi*pdf
> > catalogue
> > > > > that
> > > > > > > > > > usually hickups right around 13megs and gets unreadable.
> > Anyone
> > > > > > > > > > got the ECM connector numbers for a 16197427 so I can
get
> my
> > > > > > > > > > S10 project finished ??
> > > > > > > > > > Lyndon.
> > > > > > >
> > > > > >
> > > > >
> > > >
> >
>
> --------------------------------------------------------------------------
> > > > > > --
> > > > > > > To unsubscribe from gmecm, send "unsubscribe gmecm" (without
the
> > > > quotes)
> > > > > > > in the body of a message (not the subject) to
> > > > > majordomo at lists.diy-efi.org
> > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> >
>
> --------------------------------------------------------------------------
> > > > > --
> > > > > > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the
> > quotes)
> > > > > > in the body of a message (not the subject) to
> > > > majordomo at lists.diy-efi.org
> > > > > >
> > > > > >
> > > > >
> > > >
> >
>
> --------------------------------------------------------------------------
> > > > --
> > > > > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the
> > quotes)
> > > > > in the body of a message (not the subject) to
> > majordomo at lists.diy-efi.org
> > > > >
> > > >
> > >
> >
>
> --------------------------------------------------------------------------
> > --
> > > > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the
> quotes)
> > > > in the body of a message (not the subject) to
> > majordomo at lists.diy-efi.org
> >
>
> --------------------------------------------------------------------------
> > --
> > > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the
quotes)
> > > in the body of a message (not the subject) to
> majordomo at lists.diy-efi.org
> > >
> > >
> >
>
> --------------------------------------------------------------------------
> --
> > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> > in the body of a message (not the subject) to
majordomo at lists.diy-efi.org
> >
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org