Prom problem?

[Bob Valentine]

I've had this occasionally with my '730 (running 730 code *^),  Reseating
the eprom usually fixes it.   Sometimes the idle goes wierd after a new
chip, quick cycle of the power to the ECM fixes it every time.  

I've learned is to watch the CEL after putting in a new chip.  If it
doesn't do one quick blink after power up, something's wrong.  

-> Bob Valentine
-> bob at tecmark.com


At 08:07 PM 3/5/2001 -0600, you wrote:
>Well I'm having a slight problem with the 749 code in the 730.  Seems when I
>swap chips the ECM wants to get a check engine light and run like total
>crap.  I pull the power and EPROM and swap everything back and forth and
>after a couple times and then it works.  Anyone know a way around this?
>Like something that works almost all the time.
>
>Dan
>
>----------------------------------------------------------------------------
>To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
>in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org