Application Codes

[Programmer]

You could start with an ANLW or ARJT under the '7747 library. It only takes
30 seconds to pull the ECM out of a truck...I'd start with the correct
calibr...

Lyndon.
----- Original Message -----
From: Jove Malcolm <jmalc069 at uottawa.ca>
To: <gmecm at diy-efi.org>
Sent: Tuesday, March 06, 2001 9:58 PM
Subject: Re: Application Codes


> I just want to know which prom image to download from the site to get
> started, see what I have to work with.
> ----------------------------
> Jove Malcolm / TheDrip
> drip at home.com
> ICQ: 6778499
> http://www.sendon.net/~drip
> 1989 Chevy Blazer
> 1980 Pontiac Trans Am WS6
> 1960-1990 Combined pile of rust
> approximately the size of a vehicle
>
> ----- Original Message -----
> From: Programmer <nwester at eidnet.org>
> To: <gmecm at diy-efi.org>
> Sent: Wednesday, March 07, 2001 1:19 AM
> Subject: Re: Application Codes
>
>
> > Let me rephrase that--there's no other place to get the exact
> > PROM ID than that of the vehicle. You could figure out what you
> > have if you know year, model, trans, diff ratio, accessories (in some
> > cases),
> > engine--and get to within 4 or 5 BCC numbers from a PROM guide.
> > You can frequently find one that will be very close...by application
only.
> >
> > -----Original Message-----
> > From: Programmer <nwester at eidnet.org>
> > To: gmecm at diy-efi.org <gmecm at diy-efi.org>
> > Date: March 6, 2001 8:59 PM
> > Subject: Re: Application Codes
> >
> >
> > >That's the only place you can get the code. There's
> > >no other reference.
> > >
> > >Lyndon.
> > >-----Original Message-----
> > >From: Jove Malcolm <jmalc069 at uottawa.ca>
> > >To: gmecm at diy-efi.org <gmecm at diy-efi.org>
> > >Date: March 6, 2001 8:50 PM
> > >Subject: Application Codes
> > >
> > >
> > >>Where could one lookup the application code (the 4 digits and however
> many
> > >>numbers) for their vehicle? Other then tearing into the car and
finding
> > the
> > >>computer and looking at the sticker that is.
> > >>
> > >>----------------------------
> > >>Jove Malcolm / TheDrip
> > >>drip at home.com
> > >>ICQ: 6778499
> > >>http://www.sendon.net/~drip
> > >>1989 Chevy Blazer
> > >>1980 Pontiac Trans Am WS6
> > >>1960-1990 Combined pile of rust
> > >>approximately the size of a vehicle
> > >>
> >
>
>>--------------------------------------------------------------------------
> > -
> > >-
> > >>To unsubscribe from gmecm, send "unsubscribe gmecm" (without the
quotes)
> > >>in the body of a message (not the subject) to
> majordomo at lists.diy-efi.org
> > >>
> > >
> >
>
>---------------------------------------------------------------------------
> > -
> > >To unsubscribe from gmecm, send "unsubscribe gmecm" (without the
quotes)
> > >in the body of a message (not the subject) to
majordomo at lists.diy-efi.org
> > >
> > >
> >
>
> --------------------------------------------------------------------------
> --
> > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> > in the body of a message (not the subject) to
majordomo at lists.diy-efi.org
> >
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org