Application Codes

[ECMnut at aol.com]

Tanks Shannen!
Mike V
> 
>  Remove (4) 7mm head bolts inside the glovebox.  Pull the sides of the 
> liner in,
>  then pull the liner out past the glovebox door retaining straps.  ECM is 
> right
>  there.  Sometimes you'll need to remove the harness conectors before 
pulling 
> the
>  ecm out.  But once the ecm's free, you can connect the harness again and 
set 
> it on
>  the glovebox door for easy access.
>  
>  Shannen
>  
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org