749 Injector constant

[ECMnut at aol.com]

In a message dated 3/13/01 6:16:24 PM Eastern Standard Time, 
xybertron at cox-internet.com writes:

> Good luck :-)  I've been trying to figure this out for a week or two.  I was
>  trying to base it off the injector size for the Syclone/Typhoon but never
>  got a definite answer of what size they had.  I went with a 32# setup and
>  multpilied the number by 32 and divided by 24# and it seems to be right.
>  Well close enough.  In your case try dividing by 36 and multiply by 32.
>  Should be pretty close.  I would leave it alone if your not planning on
>  changing the injectors soon that way you have more room with the VE tables.
>  
Typhoon / Syclone engines had 30lb injectors.
Mike V
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org