May have been wrong all along

Bruce Plecan nacelp at bright.net
Sat Mar 17 01:41:03 GMT 2001


Gads yesss
Need addy
Thanks
Bruce

----- Original Message -----
From: "Dave Zug" <dzug at delanet.com>
To: <gmecm at diy-efi.org>
Sent: Friday, March 16, 2001 8:19 PM
Subject: Re: May have been wrong all along


> I missed the beginning of the thread, and it is not attached. I have a set
> of 6 used RED TOPS in the junk pile for the GN if you want them. $40.
>
> ----- Original Message -----
> From: Rex Weatherford <rexweatherford at home.com>
> To: <gmecm at diy-efi.org>
> Sent: Thursday, March 15, 2001 8:04 AM
> Subject: Re: May have been wrong all along
>
>
> >
> > ----- Original Message -----
> > From: <rrauscher at nni.com>
> > To: <gmecm at diy-efi.org>
> > Sent: Thursday, March 15, 2001 8:55 AM
> > Subject: Re: May have been wrong all along
> >
> > > And I believe that others have reported the same thing. Going
> > > to 30's in a TPI setup with no idle or low speed problems
> > > (with corrected cal). Then there is the Quad4 running I think
> > > 33's? in a port PnH configuration.
> > >
> >
> > 32's..  I'm looking for 36-38's  Anyone know of a good source?
> >
> > > They idle fine. And need that much fuel for the high rpm
> > > usage. (very little on-time available).
> >
> > Exactly.  Even moreso for 7000 RPM and above..  I've heard of 2.5L
hybrids
> > running 40-42 lbs range.
> >
> > Rex
> >
>
> --------------------------------------------------------------------------
> --
> > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> > in the body of a message (not the subject) to
majordomo at lists.diy-efi.org
> >
> >
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org




More information about the Gmecm mailing list