Externally mountable IAC

[Brian Roth]

Cool, thanks.
Brian

> ----------
> From: 	Bruce Plecan
> Reply To: 	gmecm at diy-efi.org
> Sent: 	Tuesday, March 20, 2001 6:29 PM
> To: 	gmecm at diy-efi.org
> Subject: 	Re: Externally mountable IAC
> 
> 
> Any v8 TPI from 85-92.
> 86-87 Turbo Buick
> There has to be lots of others.  Just need to cruise the junkyards
> Bruce
> 
> 
> 
> > Do you have any idea what the application would be for one of those
> IAC's
> on
> > the removable housing? I assume you are talking about a GM application.
> >
> > > ----------
> > > From: Bruce Plecan
> > > Reply To: gmecm at diy-efi.org
> > > Sent: Monday, March 19, 2001 7:21 PM
> > > To: gmecm at diy-efi.org
> > > Subject: Re:
> > >
> > >
> > > All the newer TBI GM IAC is done with a stepper motor and pintle on
> the
> > > end
> > > to bypass air.   On some of the TPI stuff the IAC is on a removeable
> > > housing, so you could make a remote IAC with one of those housings, a
> > > plate
> > > of AL, and a pipe tap.
> > > Bruce
> > >
> > >
> > > > Question: How is idle speed controlled on the standard GM two barrel
> > > > throttle bodies? I looked around the junk yard and could not see an
> idle
> > > > speed controller on any of the two barrel units but I do not think I
> saw
> > > any
> > > > non Caddy TB's. I think I saw some on some one barrel units. Is
> there
> an
> > > > external ISC that I might be able to use that just regulates the
> amount
> > > of
> > > > air  that bypasses the throttle? The hybrid throttle body I have
> > > produced
> > > > seems to have a provision for manual idles speed setting only?
> > >
> > >
> >
> >
> --------------------------------------------------------------------------
> > > --
> > > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the
> quotes)
> > > in the body of a message (not the subject) to
> majordomo at lists.diy-efi.org
> > >
> > >
> >
> --------------------------------------------------------------------------
> --
> > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> > in the body of a message (not the subject) to
> majordomo at lists.diy-efi.org
> >
> 
> --------------------------------------------------------------------------
> --
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
> 
> 
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org