Externally mountable IAC

[Brian Roth]

I think I understand now. That sounds like it will work.

Thanks,

Brian

> ----------
> From: 	Tedscj at aol.com
> Reply To: 	gmecm at diy-efi.org
> Sent: 	Wednesday, March 21, 2001 10:49 PM
> To: 	gmecm at diy-efi.org
> Subject: 	Re: Externally mountable IAC
> 
> In a message dated 3/21/01 11:30:11 AM Eastern Standard Time, 
> broth at sanjuan.edu writes:
> 
> << Sounds promising except I do not know if I have a space large enough to
> put
>  a hole that big in the TB. I would like to try to do it with vacuum hoses
>  connecting the IAC to external ports. I hope I am explaining this well.
>  
>  Brian  >>
> 
> 
> It's hard to explain if you cannot actually see the part, but instead of 
> mounting it to a hole like I did, you could mount it to a flat piece of 
> metal, or even a stout piece of plastic.  Then you just attach a 'nipple'
> to 
> the piece of plastic, and attach the vacuum hose to that.
> What you should do is go to the junk yard and pull one of these things off
> 
> and take it home and look at it for yourself.  You will certainly be able
> to 
> do something with it.  Its an easily adaptable piece of hardware.
> HTH,
> Ted
> --------------------------------------------------------------------------
> --
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
> 
> 
----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org