rising rate 3bar map etc

[Bruce Plecan]

In the archives,
I posted about the changes, and you lose the TCC (I think it was)
Same basic PCB,  but the 749 can do some other things, so the pins move
some.   I think hunting at Ludis site would be worth a visit.
Bruce



----- Original Message -----
From: "Programmer" <nwester at eidnet.org>
To: <gmecm at diy-efi.org>
Sent: Monday, March 26, 2001 9:22 PM
Subject: Re: rising rate 3bar map etc


> That works ??
>
> Lyndon
> ----- Original Message -----
> From: <ECMnut at aol.com>
> To: <gmecm at diy-efi.org>
> Sent: Monday, March 26, 2001 6:11 PM
> Subject: Re: rising rate 3bar map etc
>
>
> > In a message dated 3/26/01 7:44:22 PM Eastern Standard Time,
> > nwester at eidnet.org writes:
> >
> > >
> > >  Hmmm...ok...just seems it's getting harder to find '749s...next best
> > >  would be... ??
> >
> > A 730or 727 running the 749 code!
> > Mike V
>
> --------------------------------------------------------------------------
> --
> > To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> > in the body of a message (not the subject) to
majordomo at lists.diy-efi.org
> >
>
> --------------------------------------------------------------------------
--
> To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>

----------------------------------------------------------------------------
To unsubscribe from gmecm, send "unsubscribe gmecm" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org